Home » Posts tagged "condensation"

Family Handyman Magazine Gets it Right on Synthetic Oil Myths – almost : Amsoil Engine Flush.

Amsoil Engine Flush

Family Handyman magazine

Family Handyman Magazine had a short tip on the 4 Big Synthetic Oil Myths. www.familyhandyman.com

The big four myths listed were;

  1. You have to flush the engine before you can run synthetic oil in it. FALSE. You should NEVER flush your engine. All carmakers warn against this practice. (editorial comment; this is the one reaction we disagree with)
  2. Synthetic oil causes leaks. FALSE. This was true 25 years ago. Not anymore. Current formulations contain seal conditioners to prevent leaks.
  3. Once you switch to synthetic, you can’t go back to regular oil. FALSE. No truth whatsoever to this one.
  4. Since synthetic oil flows better when cold, I can ignore the manufacturer’s recommendations for 5W- 20 and use 10W-30. FALSE. Heavier weight oil reduces fuel efficiency and can mess up valve timing mechanisms. Stick with the manufacturer’s oil weight recommendations.

Amsoil Engine Flush

In general, Family Handyman gets it straight on these tips. These have each been a long standing myth so it’s good to get a major magazine to clear the air. We agree with their reaction to tips 2,3, and 4.

Engine Flush

Amsoil has sold an engine flush product for years. In many cases, it’s not needed. However, in certain cases it’s a proper product to use to transition a car to synthetic oil. It’s been used in thousands of vehicles by thousands of Amsoil customers with no issues.

Amsoil Engine Flush

Amsoil Engine Flush AMSOIL Engine and Transmission Flush (FLSH) helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Its potent, detergent-based formula cleans sludge and deposit build-up, promoting lower operating temperatures and reduced oil consumption. AMSOIL Engine and Transmission Flush is safe on parts and can be easily disposed of with waste oil. Amsoil Engine Flush

Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but over time they gather harmful deposits that cause power and performance loss. Stop-and-go driving, prolonged idling, short trips that do not allow the engine to reach full operating temperature, towing, the ingestion of airborne dirt, fuel dilution, water condensation and oxidized oil all can promote sludge build-up in motor oil and transmission fluid. As it settles, sludge clogs narrow oil passages, restricting oil flow to vital parts, especially the upper valve train area. Amsoil Engine Flush

In transmissions, deposits can form on clutch plates, causing hesitation and erratic shifting. Ultimately clutch glazing can set in, reducing the life of the transmission. Deposits in engines and transmissions can accelerate wear, causing power loss and increased fuel consumption. Amsoil Engine Flush

• Cleans engines and transmissions for improved efficiency, fuel economy and lower emissions
• Prolongs equipment life
• Detergent-based formula more environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil

Installing new oil or transmission fluid into a dirty vehicle may not be enough to remove deposits and increase efficiency. The detergents and dispersants in some lubricants may not be able to handle leftover sludge and deposits, and the new lubricant soon becomes unfit for service, accelerating the formation of even more harmful deposits. Amsoil Engine Flush

AMSOIL Engine and Transmission Flush Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush features a multi-use formulation that dissolves and disperses sludge, varnish and deposits in both engines and automatic transmissions. Due to its detergent-based formulation, used AMSOIL FLSH can be easily disposed of with waste oil, making it more user-friendly. Its advanced formula of light base oil technology, powerful detergents and dispersants provides safe cleaning action. AMSOIL FLSH is compatible with both petroleum and synthetic oils, preparing poorly maintained equipment for installation of new oil. It represents the first step toward restoring neglected equipment to top-notch performance. AMSOIL Engine and Transmission Flush provides the following benefits in only one treatment:

Gasoline and Diesel Engines

• Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through sludge removal
• Easy disposal

Automatic Transmissions

• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates, helping improve efficiency
• Promotes smoother operation and transmission life through reduced shift delay

Applications
AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. It is not recommended for CVT transmissions or differentials.

Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission Flush is safe enough to be used at every oil change. If using a flushing machine, follow the manufacturer’s recommendation. Otherwise, use the following guidelines:

Engine: Add 16 oz. bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.

Transmission: Engage emergency brake. Add 16 oz. bottle of AMSOIL Engine Flush to transmission oil fill port. Idle for 10-15 minutes; shift through drive and reverse. Do NOT place vehicle under heavy load. Drain entire transmission and torque converter of fluid. FILTER MUST BE CHANGED prior to refilling with new transmission fluid.

NOTE: It is not recommended to flush transmissions that do not have a removable pan or access to the transmission filter.

 

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates pre-cleanup. Varnish and glazing is heavy on some of the plates.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates after cleanup with AMSOIL Engine Flush reveal lighter glazing and varnish.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head pre-cleanup. Note the sludge deposits on and around the valve springs and push rod openings.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head after cleanup with AMSOIL Engine Flush. The valve springs and push rod openings are noticeably cleaner, with fewer sludge deposits. The manufacturer’s stamping is more easily seen.

http://www.syntheticoilhq.com

Diesel fuel treatment

WordPress Tags: Handyman,Magazine,Synthetic,Myths,engine,FALSE,editorial,reaction,Current,Once,truth,manufacturer,Heavier,efficiency,valve,Stick,tips,myth,Flush,Amsoil,product,cases,transition,customers,Transmission,FLSH,gasoline,formula,sludge,consumption,performance,Stop,temperature,ingestion,dirt,dilution,condensation,area,plates,hesitation,life,equipment,Detergent,Compatible,treatment,results,vehicle,lubricant,formation,Benefits,products,features,user,technology,action,petroleum,installation,Diesel,Engines,rings,lifter,noise,removal,Easy,disposal,Automatic,operation,Directions,Though,machine,recommendation,Otherwise,guidelines,bottle,port,Idle,Ensure,system,Remove,Refill,Engage,emergency,Drain,FILTER,NOTE,cleanup,Varnish,Cylinder,recommendations,mechanisms,vehicles,emissions,transmissions,temperatures,ports,differentials,thousands,detergents,dispersants,formulation

Share

AMSOIL PRODUCTS PREPARE EQUIPMENT FOR TOUGH WINTER WEATHER

Amsoil – Free Amsoil Catalog

AMSOIL PRODUCTS PREPARE EQUIPMENT FOR TOUGH WINTER WEATHER

Free Amsoil Catalog shipped to you door.

The fall months are the time to place boats, motorcycles and lawn care equipment into storage and prepare snowmobiles, snowblowers and other vehicles for the coming winter.

Amsoil

AMSOIL products are formulated to provide maximum protection for engines and fuel systems during storage, while Amsoil synthetic motor oils’ low pour points provide superior cold-temperature protection and performance in two-and four-stroke winter equipment.

 

Fall Storage Protection

Gasoline can break down in as little as 60 days, causing varnish and gums that clog injectors, fuel lines and carburetors, leading to poor engine performance and starting problems. In many applications, draining the fuel system can be impractical, and doing so can expose the system to corrosion on the bare metal in the tank and fuel system and cause gasket and seal cracking.

AMSOIL Gasoline Stabilizer reduces the oxidation that occurs when fuel is store for extended periods, improving performance, extending equipment life and decreasing maintenance expenses.Amsoil
During storage, fluctuations in ambient temperatures can form condensation within the engine that can cause surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is dry-started in the spring.

AMSOIL Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean application, while reaching more components and offering complete distribution of the oil, something especially beneficial in applications with horizontal cylinder orientation, such as outboard motors.

Winter Four-Stroke Performance 

Conventional oils thicken in the cold, which can result in inadequate lubrication to critical engine parts at cold start-up, or even prevent the engine from starting.
AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil provides serious protection and performance in four-stroke engines, including ATVs and snowmobiles. Its broad 0W-40 viscosity rating effectively protects in both hot and cold temperature extremes.
AMSOIL Formula 4-Stroke Synthetic Small Engine Oil provides exceptional protection in the severe-service conditions common in both gasoline-and diesel-fueled small engines including welders, skidsteers, compressors, snowblowers and more. It remains fluid at sub-zero temperatures for superior cold-weather protection.
Winter Two-Stroke Performance
AMSOIL DOMINATOR and INTERCEPTOR
Synthetic 2-cycle Oils provides exceptional performance in snowmobiles and other two-stroke equipment. Amsoil DOMINATOR is formulated with heavier base oils for “on the edge” operation, while also protecting pistons and bearings subjected to the rigors of extreme riding.
AMSOIL INTERCEPTOR is engineered specifically for power-sports applications and engines equipped with exhaust power valves. It contains the finest synthetic base oils and additives for exceptional cleanliness, while controlling exhaust valve sticking and providing outstanding overall lubrication.
Gasoline Additive
AMSOIL Quick shot SE is formulated to thoroughly clean varnish, gums and insoluble debris in two-and four-stroke gasoline-powered small engines and power sports equipment fuel systems, restoring peak performance. Amsoil Quickshot effectively addresses performance issues related to ethanol, water and dirty pump gas, while stabilizing fuel between uses and during short-term storage periods. Use Amsoil for fewer fuel related problems and better winter performance.

http://www.syntheticoilhq.com

 

Share