Home » Posts tagged "fleet"

AMSOIL SYNTHETIC LUBRICANTS INCREASE FUEL ECONOMY 6.54 PERCENT

imageAMSOIL SYNTHETIC LUBRICANTS
INCREASE FUEL ECONOMY
6.54 PERCENT IN DIESEL
TRUCKING APPLICATIONS1

FREE Amsoil Catalog

For a copy of this study, ask for it in the catalog request form!

Use this link for all Amsoil heavy trucking products on one page.

Industry-Standard Testing

image

To determine the fuel economy benefits of its synthetic lubricants, Amsoil conducted the industry-standard SAE J1321 In-Service Fuel Economy Test Procedure.
First, the baseline rate of fuel consumption was determined for two nearly identical Kenworth® T800B diesel trucks and 53’ trailers from Ford® Motor Company’s* Rawsonville, MI fleet. Texaco brand conventional lubricants were installed in each vehicle’s engine, transmission, and front and rear differentials. Both trucks simultaneously completed runs on a 40-mile test route representative of real-world driving conditions beginning and ending at Ford’s Rawsonville fleet maintenance facility.
Fuel consumption was recorded from each vehicle’s engine control module (ECM)
following each run. Although both vehicles were operated using the same conventional
lubricants and according to the same procedures, the test truck consumed an average
of 0.37 more gallons of fuel per run compared to the control truck.

 

image

 

The test truck alone was then thoroughly flushed of its conventional lubricants prior to
installing AMSOIL synthetic lubricants. Both trucks simultaneously completed runs on
the test route according to the same procedures used during the baseline segment. Fuel
consumption data was again recorded from the ECMs. The switch to AMSOIL synthetic
lubricants eliminated the 0.37-gallon difference in fuel consumption per baseline
segment run, resulting in 6.54 percent improved fuel economy.

image

 

WordPress Tags: AMSOIL,SYNTHETIC,LUBRICANTS,INCREASE,FUEL,ECONOMY,PERCENT,benefits,industry,Service,Test,Procedure,consumption,Kenworth,Ford,Motor,Company,Rawsonville,fleet,Texaco,vehicle,engine,transmission,Both,world,maintenance,module,Although,procedures,truck,trailers,differentials,vehicles,trucks

Share

Fire Department Counts on AMSOIL Synthetic Lubricants

Get a FREE Amsoil Catalog

Amsoil

Amsoil

Direct Jobber Craig Hamrick of Macomb, Ill. has been a firefighter in charge of fleet maintenance for 23 years. “My wife and I have been Dealers since 2006 and became Dealers after seeing the impressive results AMSOIL demonstrated in the fire department fleet,” Hamrick said. The fire department is a commercial account of Dealer Glenn Mike Arnold, Hamrick’s sponsor. “We have used Amsoil lubricants since 2003 in the fleet,” Hamrick said. The department has 11 vehicles and numerous small engines and generators, all running with Amsoil products. “Glenn’s knowledge of Amsoil products has helped us select the right products for our needs. Every vehicle in our fleet has AMSOIL installed from front to back.” AMSOIL Powers Generator The Macomb Fire Department generator at the main station is an Onan 150KW unit that is powered by a Cummins QSB 6.7 liter diesel. The generator is equipped with an AMSOIL Duel Remote By-Pass System and Ea Full-Flow and By-Pass Filters. For ease of oil sampling, there is a petcock on one of the ports on the filter housing. The engine is filled with AMSOIL  premium API CJ-4 5W-40 Synthetic Diesel Oil (DEO). “The reason for choosing Premium 5W-40 over AMSOIL Premium 15W-40 Synthetic Diesel Oil (DME) is the slightly better flow characteristics of the 5W-40 for cold-weather startup,” Hamrick said. “While this unit has a block heater to keep the coolant warm, the oil can still be fairly cold. This generator must go from stopped to running with full electrical load in less than one minute. The cold flow characteristics of AMSOIL diesel oil provide maximum protection and peace of mind for me and our department.”

Get a FREE Amsoil Catalog

The fuel is also treated with AMSOIL Diesel Concentrate plus Cold Flow Improver at each fill-up. “The savings are substantial,” Hamrick said. “We only change oil based on oil analysis now, where before we changed every three months or 250 hours. Fleet uptime is one of the most important benefits for us.  Our equipment must respond and perform at maximum capability every time. The generator is just as important.” Oil Analysis Proves AMSOIL Benefits. Hamrick said he was a skeptic of extended drain intervals when he first was approached about AMSOIL synthetics. However, he soon learned the saving potential of AMSOIL synthetic lubricants. The department saves money through the reduction of waste oil generated, as well as fewer costs for equipment repairs and services, both in time and labor.

Get a FREE Amsoil Catalog

The department regularly sends oil samples to OIL ANALYZERS as part of its maintenance program. “The proof is in all of the oil analysis reports,” he said. “We can see by the results.” AMSOIL lubricants are especially well-suited to emergency service vehicles where every second counts. “You never know when you’re going to get that call, and there isn’t a lot of extra equipment available,” Hamrick said. “We need our equipment to be ready and able to perform.”
Even during the winter months, the generator has “instant oil pressure” when it’s fired up, he said. “If you walk into
our station all you will see in our maintenance room is AMSOIL products.” Growing His Own AMSOIL Business
Hamrick specializes in commercial accounts because his background is in heavy-duty diesel equipment. Name recognition of AMSOIL has improved in the years since he became a Dealer. “AMSOIL is easier to sell now
than even when I started as a Dealer,” Hamrick said. He credited AMSOIL INC. for its work building AMSOIL brand recognition in numerous markets. His experience with the products also helps him with other fleet managers as he tells them his first-hand experience of AMSOIL cost savings, equipment performance and longevity. “It’s all about saving money and extending the life of the equipment,” Hamrick said.

Share