Home » Archive by category "Uncategorized" (Page 14)

The 1953 Alfa Romeo 6C 3000 Colli Spider

One of the many classic cars built in the 1950s was the 1953 Alfa Romeo 6C 3000 Competizione Maggiorata Colli Spider. Hidden by Alfa Romeo due to the Second World War, the 6C 3000 CM Colli Spider had an advantage over its competition as no one ever saw a vehicle quite like it before. The previous models of the 6C 3000 CM was powerful indeed but it wasn’t able to hurdle over its competitors from Ferrari and Vittorio Janos Lancia. With victory in mind, Alfa Romeo designed the 1953 6C 3000 CM Colli Spider and it won the first Gran Premio Supercorte Maggiore in Meran in 1953 at the hands of driver Juan Manuel Fangio.

The Spider’s Roots

As touched on above, Alfa Romeo anticipated a war and hid the molds they made for competition cars and production molds. After the Second World War was over, Alfa Romeo dug up their models and immediately continued production. This gave birth to the Alfra Romeo 158 Grand Prix racer, which was the winner of the first ever Formula 1 Championship held in 1950. It also produced the 6C 2500 road car which was the only luxury super car available at the time.

Alfa Romeo proceeded to make modifications to their models and among these was the shorter wheelbase and revised rear suspension. They then cut 20mm further to the wheelbase in order to lessen weight and improve the car’s ability to take corners. Also, Alfa Romeo replaced the rear torsion bar and friction damper setup with a single transverse leaf spring and twin hydraulic dampers. They also improved the engine performance going from 120 brake horsepower to a 145 brake horsepower. These changes coupled with an aerodynamic body resulted to top speeds of over 200 kilometers per hour for the 6C 3000. Despite these model changes, Alfa Romeo was still unable to beat competitors from Ferrari and Lancia.

Now building for the 1953 competitions, Alfa Romeo designed a car that used an engine with 6 cylinders with a displacement of just under 3.5 liters. This made Alfa Romeo’s new car twice as powerful compared to the 1947 model and has dubbed it the Alfa Romeo 6C 3000 CM Colli Spider. For your information, only 2 of these speed demons were ever built. The first one was the one that Fangio drove to victory and the second one, which utilized a shorter chassis and a 3-liter engine, was destroyed during its first test. Today, the only 6C 3000 CM Colli Spider can be seen at Museo Storico Alfa Romeo.

William is enthralled with muscle cars and loves to write about these classics to help educate others about these amazing vehicles.

Share

Dr. Porche Developer of the Volkswagen Beetle

Who would of thought that an ugly duckling car would go on to become a much loved Disney movie hero in the form of Herby the 4 cylinder Volkswagen VW Beetle of most determined and passionate vehicle on the race and rally tracks .

The Beetle project was started in 1933 by Adolf Hitler when he became the German Chancellor. Once the design was finalized, the site for the factory was chosen near the village of Fallersleben. The foundation stone was ceremonially laid by Adolf Hitler in May 1938. He then announced that the car would be called the KdF-Wagen or the Strength through joy car. By 1939, the first part of the plant was finished. Due to the outbreak of World War II, only 630 Volkswagen were produced during this period. However, over 50,435 Kubelwagen’s, the Volkswagen’s military version, were produced. Hitler turned to Ferdinand Porsche, one of Germany’s most renowned car designers at that time for the project.

Work resumed and up to 7677 cars were built in 1946. The plant was able to sustain this output even though it was very difficult. In 1948, Heinz Nordhoof was made General Manager. He instantly set out to make the Beetle go global. In July 1947 he launched a highly enhanced export model which sold very well in Holland. He saw that the great potential of the American market and in 1955 instituted Volkswagen of America. When the war ended, the town came under British control and was renamed Wolfsburg. Wolfsburg then received visitors from the British Society of Motor Manufacturers and Traders. They were doing research on the German motor industry during the war and were obviously impressed by both the Volkswagen and the factory. Its simplicity allowed it to be produced even cheaper than the engine then being developed. With its air cooled ( as opposed to the standard water cooled radiator designs), engines Beetles engines were ultra reliable and always started in cold winter climates without being garaged. Canadians especially those in northern Manitoba,Ontario , Alberta and BC British Columbia loved them for that.
Yet the failing – of the reverse of having no radiator meant no hot water and antifreeze for the in car heater. This was remedied in cold climates ( important for safety concerns for the windshield defroster and frosted icy windows ) with a gas heater. Still gas heaters used a lot of gasoline and were not cheap to operate.

In 1937, the VW was made a government-funded project. Hitler said that the car should look like a beetle to be streamlined. Early VWs were well known to their drivers having the auto battery under the driver’s seat. Often the stench of the hydrogen sulfide gasses emanating from under the seat – from the charging battery would almost overcome the driver themselves. Once the car’s design was settled, the German government started work on the factory. After the Second World War the VW plant was offered to both GM General Motors and even Ford as war reparations . The comment that always came back as a biting insult to the marketing intelligence and insight of the Ford Motor Company’s patriarch Henry Ford was that an adviser had noted to him regarding the Volkswagen Beetle product “I would not give you a plugged nickle for it”. Sadly ( for him and Ford” Henry Ford listened, agreed and payed heed to the consultant’s sage advice. The first phase of the plant was finished in 1939. Manufacturing was however interrupted due to World War II.

It had an air-cooled rear-mounted boxer engine and used Porsche’s torsion bar suspension. This design became the basis for the Volkswagen, designated in 1934 as Type 60 in the Porsche design registry. Production resumed and at least 7677 cars were built in 1946. Heinz Nordhoof became the General Manager in 1948. After the WW2 – a major earner of foreign currency to the West German economy was from the sale of Beetles overseas to North America – including Canada as well as the USA. Long before Toyota became a household name in the US and Canada the Beetle had made its record as the best ranking import car model and brand. By 1968, sales were highest at 423,008 cars sold. Plants were created from 1951 to 1964 in South Africa, Brazil, Australia and Mexico.

In 1950, the 100,000th car was built, and in 1965 Wolfsburg produced its first millionth Beetle. Unfortunately, Heinz Nordoff died in 1968. The German government took over VW project in 1937, injecting. RM 50,000 (₤42,918) into the project. Hitler commented that the car should look like a beetle, to make it streamlined. Exhaustive tests were conducted and changes like introduction of a divided back window, increased output of the engine cooling fans, adding of running boards and one piece bonnet instead of two were made.

In 1972, the Beetle overtook the Model T Ford as the best-selling car in history. But VW made the same mistake as Ford by keeping the Beetle in production far too long. In 1974, Volkswagen recorded its first loss. Thus, the Beetle was replaced and the last Wolfsburg Beetle was produced in July 1974.

This rugged little car’s charm has won the hearts of many, making it an all-time top-seller. Even with its aged design, it’s still being manufactured after more than forty years. More than twenty million Beetles have been made and more continue to be produced in Mexico and Brazil.

Auto Dealers Pitt Meadows Surrey BC Delta Low Payments Easy Financing Edmonton Mazda3 2011 2010 Premium Used

Share

Our Top Tips For The F1 Championship In 2011

That time of year when we make our way to the starting line for the Formula 1 Championship races is upon us once again. Although the season started just under a month ago, it’s easy to make some predictions about which teams and which drivers we might see on the winners’ podium when all is said and done.

The obvious pick for winning driver is Sebastian Vettel since he won last year’s Formula 1 championship. Vettel definitely has the fastest car and could easily win just based on that fact alone. Plus, despite some mechanical failures, driver errors, and wrecks during last year’s run, Vettel has gained the confidence a champion needs to regain his title.

Vettel’s cars are being designed by Adrian Newey, arguably the best Formula 1 engineer around and he has Red Bull footing the bill for him. Put all of these things together and you have a recipe for a winning F1 driver.

If Vettel doesn’t bring home the trophy, the next likely candidate is Fernando Alonso and there are several reasons we see him as the favorite to win right behind Vettel. We admit Vettel might have the fastest car, but Alonso is the best driver by far. When you consider that Alonso has won championships for three F1 teams and was definitely the most successful of the Renault drivers, you can’t argue that he’s not the best driver.

Think about it, even though Ferrari didn’t have the best car last year, Alonso was still very close to becoming last year’s Formula 1 champion. Alonso is definitely the best driver Ferrari has and even though that may not be enough to help Ferrari when it comes to the Constructor’s Championship, it will go a long way to helping Alonso in his continuous battle against team Red Bull. If Ferrari continues to make its cars faster and/or Red Bull has some of the same stumbles it had last year, Alonso could easily slide in and take the F1 championship title.

This isn’t ground breaking F1 news, but Mark Webber is definitely this year’s dark horse when it comes to winning the F1 championship title. Webber almost pulled an upset to win last year’s championship and it wasn’t until the end of the season that we realized he wouldn’t be the F1 champion Some argue that the obvious tension between Webber and his teammate Sebastian Vettel – both on team Red Bull – will cause Webber to either leave the team or be forced to leave, but none of that matters when you consider that Webber is still driving a Red Bull car this year.

If Webber can overcome Vettel, he will have completed the hardest part of becoming this year’s F1 champion. But, even if he can do it, Alonso and team Ferrari could still take the championship from both of them.

Although, when all is said and done, we could see someone like Lewis Hamilton sweep in and take the championship for team McLaren. McLaren is still struggling with some of the same challenges they had last year so that probably won’t happen, but this is Formula 1 racing – anything is possible.

Share

The Classic Maserati A6 Series

If you want a classic car that can deliver the speed and power that you want, all you need is a car from the Maserati A6 series. The Maserati A6 are actually several cars which are all made by Maserati of Italy, for the founders of Maserati, the Alferi brothers. The Maserati A6 is also equipped with a straight six engine with the power and speed that will no doubt get your attention in a hurry. The Maserati A6 is the perfect example of a car that delivers optimum performance, resulting to break neck speeds incomparable to its peers.

One of the Maserati A6 models that you can get is the A6 TR or Testa Riportata. This is 1.5 liter straight six car that was based on the pre-war Maserati 6CM, which can manage 65 boiler horse power. Initially, it appeared as the A6 Sport or Tipo 6CS/46. This type of car is a barchetta or little boat type. It’s built for speed, and can really go fast depending on the driver’s whims. This type is developed by Ernesto Maserati and Alberto Massimino. This model eventually became the A6 1500, a two door berlinetta or your typical sporty coupe. It was first shown in Geneva, Switzerland at the 1947 Salon International de l’Auto. A spider or convertible model is then showcased in 1948 at the Salone dellautomobile di Torino.

There are also 2-liter straight six versions of the Maserati A6. This is the A6 GCS, which is made from cast iron block and can be used for racing and sports. This car is capable of producing 120 boiler horsepower, and was commonly used for high-speed races during its initial release. The A6 GCS also has a single seater, cycle winged racing version called the monofaro. This first appeared at Modenain in 1947. In 1948, it was able to win the Italian Championship while piloted by driver Giovanni Bracco. In order for this classic car to compete in the World Sportscar Championship, it was overhauled, giving way to the creation of the A6GC S/53, capable of delivering up to 170 boiler horse power. It was able to capture the Italian Grand prix in 1953 and 54, by drivers Sergio Montavani and Luigi Musso, accordingly. The latest incarnation of the A6GCS was the A6GC S/54 which was shown at the 1954 Mondial de l’Autombile in Paris. This model was then referred to as A6G/2000, and only around 60 were made worldwide, making it a true classic.

To learn more about our feature classic, the 1969 Dodge Charger, visit our MuscleCarMonster.com blog today.

Share

The Importance of Using the Right Oil in Your Car

It’s vital that you use the right kind of oil in your car as it can really make a difference to the life of your engine. Every time you use your car, it wears down the component parts of the engine a little bit more, so using oil is really important to make them last longer and keep things working smoothly for as long as possible.

The purpose of using motor oil is to stop all the metal parts in the engine grinding together and causing damage. Also, when car engines run, they produce by-products such as acid and silica that can be damaging. Motor fluid keeps them from causing damage by making sure the moving parts are all covered in oil. This makes automotive lubricants extremely important.

Because it’s such an important thing, you need to make sure you’re using good motor oil that will keep your car working well. There are three main types of automotive lubricant: mineral, semi synthetic and fully synthetic.

Mineral motor oil

This type of oil needs to be changed more regularly and offer basic protection for car engines, but they often have trouble turning over the engine in cold weather, which means you need to be really careful how you use them.

Semi synthetic motor oil

This type of oil needs to be changed less frequently, which means it is more effective for longer than mineral oils. You also good pretty good protection, particularly when the car first starts up and it it’s three times better at reducing engine wear, but you need to make sure you get a really good quality semi synthetic motor oil to make sure the engine will be able to start smoothly even at low temperatures.

Fully synthetic motor oil

This type of oil is specially formulated to be good at what it does and it can help you make fuel economy savings as it’s much more efficient at protecting your engine and keeping it working properly. It’s a great oil to use if you’re looking to maximise your engine power and overall performance. It also offers very good protection to moving parts of the engine and is the best of the three different types of automotive lubricant when it comes to starting the engine in cold weather. It stops the engine from wearing out and prevents build ups of the sort of dangerous deposits mentioned above. This makes synthetic motor oil a good option for your car.

It’s really important that you use a good, reliable oil for your car engine as otherwise it can lead to major problems. If you use the wrong oil, it won’t be able to cope in the conditions it’s subjected to, which can force it to change its chemical composition. This leads to it turning into a sort of sludge that’s sometimes known as the Black Death. This can cause engines to seize up and terrible damage to be done, so it’s definitely worth giving serious consideration to your choice of car oil.

The selection of the correct oils and lubrication fluids is a vital part of the safe ownership of any mechanical equipment, be it a car or industrial plant. Graham Baylis is working with some of the best experts in the field, Exol Lubricants. See www.exol-lubricants.com

Share