Home » Motorcycle » How To Make Your Second-hand Motorcycle Endure

How To Make Your Second-hand Motorcycle Endure

It does’nt make a difference if you own a new or used motorcycle there are a lot of things you ought to do to make your bike last longer, be safer and get a lot more riding hours.

If you have a nice new motorbike, you must to take safety measures. You have to break the motorcycle in; this means that you ought to not rev the motorcycle to high as you drive it for a certain period.

On the whole people when they get a new or custom motorcycle they have a tendency to pamper and baby their new toy, checking the oil and tire pressure regularly, making sure to follow through with all of the planned factory warranty maintenance.

You know how to constantly tell a brand new bike owner. They are the ones that when you go on a trip together, each time you take a break they are right out there with their buffing rag just polishing away.

However, just like any latest toy, the newness wears off then often times the pre ride checks and the maintenance does as well. This can ad preventable wear and tear on your motorcycle and is just down right dangerous.

Although even new tires and parts can have a flaw and give rise to a safety hazard primarily this is not the case. It is a safety fact that a well-maintained motorbike is far more reliable and safe to ride then a uncared for one.

Here are a few straightforward checks you can do to greatly improve the life of your motorbike and ad hours of safe riding to your favorite past time, bike riding.

To begin with, even if this might sound cliché, at all times do a pre-ride safety examination. It just takes a couple of minutes and it will add to the life of your motorcycle and keep you safe and sound.

Check the tires & wheels:
You should constantly inspect the tires for signs of abrasion. Bike tires come with a segment of the tire called a wear away bar. This is a section of the tread that when the tire wears through extensively a sufficient amount will start to reveal even with the rest of the tread. If the tread on your tire is flush with the wear bar, it is time to acquire new tires.

You must constantly check the tire pressure. Having properly, inflated tires help in handling and stopping and will to a great extent improve the existence of your tire. And, check out the wheels to make certain there is no dents or cracks that could cause you to have a blow out whiles your out on the road.

Inspect the cables and the controls:
Inspect the clutch and the throttle wire for signs of wear out and for play. Ensure that they are not frayed and that they move easily and do not bind. If your clutch feels like it takes to long to connect you can adjust it. However if you have adjusted it as far as it can be changed, in that case its time for a different clutch. Put on the front brake and see if the motorbike can roll, if you don’t’ have any fine-tuning on your front brake it is either exceedingly low on brake fluid or its time to contemplate about brakes. Carry out the equivalent with the foot brake, once more if your motorcycle can move its’ time for brakes. (If you motorbike moves as applying either the front or back brake, Please don’t ride it until you get the brakes fixed…)

Test your lights and turn indicators:
place your key on and actually walk to to the front of your motorcycle and notice if your headlight is working. Now days most motorbike headlights come on when you twist the key on. Needless to say, if you are riding an older motorbike then you will have to to turn the light on previous to examing it. Check both low and high beams. Next, turn on the right turn indicator and see if both the front and back signals are working. Perform the equivalent for the left turn signal. It only makes sinces that if any of these lights are not operational. Replace the bulbs before going away for your jaunt. While you are checking your lights, you should just as well beep the horn just to make certain it is still in working order.

Ensure the Oil and fluid levels:
In fear of stating the evident, verify the gas. Most motorcycles these days come with fuel injection and don’t hold much of a reserve. Several motorbikes though, still come with a carburetor and have a fuel valve that can be to openup to a emergency supply in you petroleum tank.

If you fuel light comes on or you opened the reserve the last time you rode, you ought to get to the gas station pronto. If your tank runs dry, you are going to have to push or leave you bike by the edge of the highway whilst you hike to get gas. You have to check your oil level before ever starting your motorcycle. In most cases, the measuring stick has an upper and a lower mark on it. Your oil should fall somewere near to the middle of these to characters when your motorbike is cold. Running your motorcycle low on oil can cause your motorbike to run hot and cause unwarranted motor ware and very serious harm to your motor. Even if your brake safety check was a success you must continually bear in mind to check your break fluid level for the reason that even though the brakes work fine if the fluid is depleted they may fail when they get hot.

Check the suspension and chassis:
Prior to you are set to go, test out your front and rear shocks. Don’t simply sit on your motorcycle and bounce a few times to check if they work. Look closely at the front and the back shocks. Check to see if there is any leakage or surplus oil draining from them. Also, check the seals to see if they are dried out or cracked. Check the rear suspension to see if the weight adjustment is appropriate for your weight. Now sit down on the motorcycle and move the handlebars to see if everything feels right and that there is on play in the front end. The very last thing to check is your break and shift linkage. When everything checks out, it’s tome to ride.

One last bit of instruction though, keep the rubber side down!

Posted in Motorcycle

Leave a Reply